Company News: Page (1) of 1 - 09/06/12 Email this story to a friend. email article Print this page (Article printing at MyDmn.com).print page facebook

Integrated Microwave Technologies, LLC (IMT) Welcomes Special Guest Speaker Yves "Jetman" Rossy During IBC 2012

microLite Transmitter and Receiver Allow Aviation Daredevil to Show Live HD Video and Audio While In Flight (September 06, 2012)
DMN Newswire--2012-9-6--Integrated Microwave Technologies, LLC (IMT), a Business Unit within the Vitec Group's Videocom Division, and a leader in advanced digital microwave systems serving the Broadcast, Sports & Entertainment and MAG (Military, Aerospace & Government) markets, is pleased to announce that aviation daredevil Yves "Jetman" Rossy will be a special guest speaker at the company's booth at IBC 2012 (Stand 1.D40).



Rossy will be on hand to discuss his amazing accomplishments in aviation and his use of IMT's microLite transmitter and receiver during his perilous and breathtaking flights. Rossy will be speaking at the IMT booth on Monday, September 10th at 12:00 and 15:00.  



Rossy is a Swiss pilot, inventor and aviation trailblazer. In 2006, he became the first and only person ever to achieve sustained human flight using a jet-powered fixed wing strapped to his back. This jet pack has earned him the nickname of "Jetman."


From two GoPro cameras mounted on the wing tips, the IMT microLite transmitter provides high-quality full HD video directly to the ground-based receive equipment. With flight distances of more than 4KM, the small, ultra-lightweight transmitter provides seamless video directly to the crowd below via large video walls on the ground. The microLite dual diversity receiver helps to ensure that there is always a signal, with no dropouts. Its ease of use and ultra-low electrical power requirements fit all of Rossy's requirements for video transmission equipment. Additionally, the antenna chosen for the wing was the Blade antenna from IMT's sister company, Haigh-Farr, which represents some of the finest antenna engineering in the world. Offering a truly hemispherical pattern, the High-Fair antenna helps ensure that the signal is transmitted to the ground.

"What Yves Rossy has been able to achieve is nothing short of spectacular and the fact that IMT's technology is allowing him to show live HD video and audio on the ground while he is in the air is a testament to the engineering and build quality of our products," says Integrated Microwave Technologies Divisional Chief Executive Stephen Shpock. "Yves has incredible stories to tell and we encourage all of those in attendance at IBC to come meet him and listen to him discuss his amazing feats of flight."

In May 2008, in front of the worldwide press, Rossy completed his first official flight over the Swiss Alps. In September 2008, 99 years after the first crossing of the English Channel by air, the man now known as "Jetman" followed the path of famed French aviator Louis Blériot, achieving an amazing flight that was broadcast live to 165 countries and widely covered by the worldwide press.

IMT's state-of-the-art microLite transmitter delivers HD/SD output at 250mW in 2k DVB-T COFDM mode. Its matchbox size makes it ideal for a wide range of broadcast applications. It supports video/audio/data transmission with selectable modulation bandwidths of 6, 7 and 8MHz. The microLite TX can output 250mW and may be reduced to low-power 20mW with the simple press of a button. If using a single video stream, users can simply switch the microLite TX into NBCOFDM (1.25 MHz/2.5 MHz) and double the range without increasing RF power. A video test pattern generator designed into the unit can be controlled externally through the preset switch, or programmed to be automatically enabled when the video input is lost. It also has an ASI input and output providing the ability to stack or multiplex multiple units. The microLite TX's user interface allows quick control of preset selection, RF power, standby modes and covert display mode.

IMT's microLite RX is a ruggedized HD/SD dual-diversity COFDM receiver that combines exceptional RF performance and ease of operation in a durable, weather-resistant package. It features superb H.264 SD and HD decoding, and supports a broad array of video output signals, including HD, ASI, HD-SDI and SD-SDI (SDI is auto-switched depending on the signal received). The microLite RX also has a composite video output, which is down-converted to SD when receiving HD signals. The receiver uses standardized cables and requires no special adapters. It also features an Ethernet port for streaming video over a LAN to remote software or hardware decoders. This allows many remote viewers to monitor the same video simultaneously.

About Integrated Microwave Technologies, LLC
Integrated Microwave Technologies, LLC (IMT) is a Business Unit within the Vitec Group's Videocom Division. The company comprises the leading microwave brands Nucomm, RF Central and Microwave Service Company (MSC), offering broadcasters worldwide complete broadcast solutions. Nucomm is a premium brand of digital microwave video systems (including COFDM and VSB) for portable and fixed link applications. RF Central is an innovative brand of compact microwave video equipment for licensed and license free broadcast applications. MSC is a premier provider of engineering, integration, technical support, installation and commissioning services.  IMT is an ISO 9001:2008 certified QMS organization and recipient of multiple industry awards for design and innovations.

More information can be found at www.imt-broadcast.com.

A Snapshot of The Vitec Group
Vitec is an international Group principally serving customers in the broadcast, photographic and military, aerospace and government (MAG) markets. Listed on the London Stock Exchange with 2011 revenue of £351 million, Vitec is based on strong, well known, premium brands on which its customers worldwide rely.  Vitec is organised in three divisions:  Imaging & Staging, Videocom and Services. Imaging & Staging designs, manufactures and distributes equipment and accessories for photography, video and events.

Videocom designs and distributes systems and products used in broadcasting and live entertainment, film and video production and MAG.

Services provides equipment rental, workflow design and technical support for camera, video, audio, fibre optic and wireless technology used by TV production teams and film crews.

More information can be found at www.vitecgroup.com.


Page: 1


Related Keywords:Integrated Microwave Technologies, LLC (IMT) Welcomes Special Guest Speaker Yves "Jetman" Rossy During IBC 2012


DMO TEXT LINKS
(Click here to place a textlink on this site)

Vegas Pro 10 Available Now
Professional HD Video, audio, and Blu-Ray creation.
CLICK HERE!!!


@ Copyright, 2012 Digital Media Online, All Rights Reserved