|Page (1) of 1 - 08/05/13||email article||print page|
A Smashing Way to Make Glass Props!If you need to break it, its easy to make it!
If you need to break a window or some such thing in your next production don't risk cuts and lacerations. Do it this way! (With stuff from the kitchen larder)
All the best movies have a car chase (think Bullitt and the French Connection) but they also should have a bullet smashing a window - or anything smashing a window really.
Whilst I can't legally show you how to do a car chase (hiring a motorsport circuit for an hour is perhaps one way), I can show you how to save money on a glazier and avoid a hospital visit.
All you need is the common kitchen ingredients of corn syrup, white sugar, cream of tartar, aluminum foil and water plus a mold. I used a casserole dish.
You may need to but a Candy (Deep Fry) thermometer if you don't have one, and they are $10 from a shop such as House.
1. Mix 2 cups of water, 1cup of corn syrup 3 1/2 cups sugar and a 1/4 teaspoon of the cream of tartar together. Bring it to the boil s-l-o-w-l-y (so that it doesn't caramelize). As it warms, it clear from its initial cloudy appearance.
2. Here's where you need the thermometer. Heat the mixture to 150 degrees C then take from the heat. This should take around 60 minutes or so. As this happens, the temperature may appear to stop rising but this is not so. It is the water evaporating and the temperature will start to rise again. IT WILL BE VERY HOT SO WEAR GLOVES OR OVEN MITTS. If this step happens too early, you may get a yellow tinge - it takes practice to get it just right!
3. Make sure the aluminium foil is moulded to the dish (some recipes call for lashings of spray vegetable oil instead of foil.
4. Pour the mixture into the mould
5. It will take about 1 hour to cool and harden
6. Remove the glass from the foil. If it sticks, heat up a knife under hot water and gently pry it up where it is sticking.
Voila. Bear in mind that heat will make it melt and get sticky.
TIPS: Make brown glass by using brown sugar, and coloured glass by adding food colouring. By the way while not as sharp as glass, it will still have an edge on any shards. Oh and it tastes terrible!
David is the owner and publisher of Australian Videocamera. He has a background in media dating back to 1979 when he first got involved with photojournalism in motorsport, and went from there into technology via a 5 year stint with Tandy Computers.
Moving back to WA, David wrote scripts for Computer Television for video training for the just released Windows and Office 95 among others, and was then lured to Sydney to create web sites for the newly commercial Internet in 1995, building hundreds of sites under contract to OzEmail including Coates Hire, Hertz Queensland, John Williamson, the NSW Board of Studies and many, many more.
David can be contacted via [email protected]
Related Keywords:breaking glass prop, how to make a glass prop, video props
To Comment on This Article, Click HERE
Most Recent Reader Comments:
Click Here To Read All Posts
Must be Registered to Respond (Free Registration!!!, CLICK HERE)